Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

LAMKIN ST +2 HYBRID GOLF GRIP – STANDARD

Original price was: £19.99.Current price is: £14.99.

In stock

The Lamkin ST +2 Hybrid Grip provides a great feeling tacky surface that is long-lasting, comfortable and far more resistant to degradation than multi-compound grips from other manufacturers. The ST Hybrid maintains its characteristics in all weather conditions and exposure to UV rays for a longer lifespan. Infused Cord in the upper zone blends with ST Genesis Material to give the anchoring hand unmatched traction regardless of weather conditions to offer maximum control without the abrasive feel sometimes associated with cord. The grip’s hybrid lower section capitalizes on a smoother, tackier treatment further accentuated by the slightly larger plus 2 design profile to provide the guiding hand a comfortable, tactile feel with excellent durability

+FREE GRIP TAPE INCLUDED WITH EACH GRIP

STEP-BY-STEP REGRIPPING INSTRUCTIONS

The following supplies are needed:

1.PRO-GRIP DOUBLE SIDED GRIP TAPE
2.STANLEY KNIFE / BLADE
3.NEW GOLF GRIP
4.SOLVENT WHITE SPIRITS
5.RUBBER GLOVES TO PROTECT HANDS
6. TOWEL / CLOTH

STEP 1 – Remove the old grip with a Stanley blade Be sure to cut away from
yourself at all times. Peel or scrape off the old grip and grip tape.
Using a cloth and Mineral Spirits Grip Solvent, clean off the residue.
*If removing a grip from a graphite shaft be careful to avoid damage to the shaft

STEP 2 – Wrap your PRO-GRIP double sided grip tape in a spiral formation from
the top of the shaft to the point where the bottom of the grip will be on the shaft.
Remove the tape backing and cover the end of the shaft with extra tape.

STEP 3 – Cover the vent hole in the butt end with your finger or golf tee, and pour
a generous portion of Solvent such as white spirits inside the new grip. Close the
open end of the grip with your hand and shake to cover the entire inside of the grip.

STEP 4 – Pour the excess Mineral Spirits Grip Solvent (through the vent hole)
over the entire length of the two-sided tape. Apply generously. Use a tray to
catch excess Mineral Spirits Grip Solvent for use on other clubs.

STEP 5 – Place the grip over the shaft butt and Push the grip entirely onto
the club. Be sure to push it all the way down and align the grip as desired.
This must be done while the grip tape is still wet.

STEP 6 – Allow grips to dry for several hours before playing.

Open 7 days · 9am – 5pm

How can we help?

Real golfers at our Cheshire Oaks store, ready to help with orders, fitting and advice.

Sales
Product advice, stock and prices
0151 356 3254 [email protected]
Customer service
Existing orders, delivery and returns
0151 356 3254 [email protected]
Quick help
Cheshire Oaks Trade Park, CH2 4JZ Contact form
0